In The Name Of Allah the Beneficence the Merciful
Title : compressive test
Professor Name : Dr Mohammadiyani
For Unit : ATTRIBUTE LABORATORY
Name & Surname Throng :
1- Masoud aboutalebian
2- And………..
ABSTRACT:
SELECT the one Refractory Brick and Measuring dimension.
LODGE between TINE establishment and Acting pressure.
Custom chart is Relay other.
INTRODUCTION:
compressive Strength ,is Strength MATERIAL diminutive .
To sort normal Measured for Ceramics .
For Sample : Refractory BRICK and structural brick.
In ceramic materials the compressive Strength is Upper Than Tensile Strength but this is Useful .
In ceramic compressive Conscious becomes pressure at ceramic to one body until tension.
A CONCRETE , Refractory Brick ,is Sentence than am materialists Wine agreement subject : compressive test.
CONFINE Tensile Strength
In ceramic Faults Cause creation weak resistance compressive becomes.
This faults INCLUSIVE :Vacancy,Dislocation and…
compressive Strength Decreasing if Decrease finds bean measure.
Pressure amount for Material Description under table.
Material | Measured Compressive Strength Kg/ Kpsi |
650 | |
BeO | 360 |
MgO | 200 |
Mg | 400 |
Fused Si | 190 |
Zr +(CaO) | 290 |
Zr Si | 210 |
SiC | ------ |
Diamond | 910 |
NaCl | 6 |
C | 414 |
NEEDFUL MATERIAL & Instrument:
1- Refractory BRICK
2- Caliper
Experimental:
The Experimental in Case to face.
1- Measure Length, Width and Altitude one Refractory BRICK at one period.
2- LODGE between TINE establishment and Acting pressure at two period.
3- COLLAPSE becomes reward tempo acts becomes power at THREE period.
4- DRAW Chart VIA Computer at four period.
5- RESOLUTION the Chart.
PORTRAIT For Impact Test:
Ago than acts power
acts power
MEANWHILE acts power
Stave brick
Team 2 chart
Team 2 chart
Team 3 chart
Team 4 chart
Name Team | Team 1 | Team 2 | Team 3 | Team 4 |
Geug length | 60 | 54 | 120 | 122 |
LENGTH | 120 | 124 | 62 | 60 |
WIDTH | 66.3 | 60.4 | 58.5 | 64 |
Result and Discussion:
Mainland base curve amount EXIST Resistance and But face congests change curl.
Time status some accidence falls PHENOMENAL NAMELY INNATE RUB.
Reason the INNATE RUB is Roughness.
Conclusion:
REAL LAPSE:
1- Don’t TENDER THREAD
2- Don’t ADJUSTMENT System
3- Time SHORTAGE
References:
1-Introdution To Mechanical properties of material
composer: haerian ardakani
2-LABORATORY Pamfilet Mechanical properties